5 posts tagged with "Everybot resources"

Instructions for installing software, preparing the robot for code and deploying the starter code have been added.

A troubleshooting section has also been added.

AndyMark has finalized their 2024 Everybot Roller Claw package which is now purchasable on their website. This kit provides everything required for a working roller claw.

AndyMark's kit is great for teams don't have a majority of the parts but some teams may only be interested in the polycarbonate parts.

Teams who are looking to acquire only the polycarbonate parts could try reaching out to a local team with advanced manufacturing capabilities. Chances are they would be happy to make a set for your team. When reaching out to the team, tell them that there are 0.125" holes in the roller claw, some teams with CNC machines may not have collets/endmill that can cut holes that small. With some minor adjustments in CAD the plates will probably work fine if the 0.125" holes are resized to 0.158" (4mm endmill).

If you are interested in finding a local team to help, you can try using FRC map. Right click on a pin near you and look for their contact info on the blue alliance. Social media could be used or the team may have a website with a "contact us" section or email address.

If you want to purchase the roller claw plates individually they can be purchased from Send Cut Send with the following link: https://cart.sendcutsend.com/egla02wkvbsz. There may a discount link eventually but we cannot promisee that. The plates are ~$50 from Send Cut Send.

We have added an overview of the Everybot, bumpers, ballast and completed robot photos to the Everybot manual.

Other small changes have been added, the video for quick disconnects is now linked and Roller Claw now has an overview image.

The roller claws now have DXFs, printable 1:1 pdfs and a purchasing link in the Everybot resources tab. The AndyMark plates are not purchasable yet, we will alert you in the Discord when they become available.

Additional clarifications have been added for machining unpatterned box tube and for using patterned box tube.

With the Everybot reveal, the following resources have become available:

• Manual with sections on the chassis, roller claw, climb and electrical layout
• CAD
• Code
• Bill of materials

We hope to release our ballast and bumpers sections by the end of the week. Additionally there are some programming specific resources (deploying code, imaging the roboRIO, etc.) on the way!